Raztec Superseded Products
Common Characteristics
- Galvanic isolation through Hall effect sensing
- Very high noise immunity
- Excellent linearity
- Wide frequency response — DC to 23kHz
- Convenient printed circuit board mounting
- High immunity to stray magnetic fields
- Low cost
- Tight specification options
- Hall sensor undamaged by high current transients
- Virtually eliminates power loss characteristic of shunts
- DC and AC current capability
- Compact size
1 The customer may add any desired number of turns
2 Higher current versions with lower gain are available
on request.
The above table shows typical models. Custom turns/gains can be made to order. Please
contact the supplier.
Safety Isolation
Where 8mm/12mm creepage distance is required for full 250V isolation, contact Raztec
for design assistance.
Return to the Products page »
|
